Distributor of High Performance
Industrial & Food Grade Lubricants

lubriplate products

LUBRIPLATE Clearplex-1 are Zinc-Free, Aluminum Complex thickened, USP White Oil-based, food grade grease. It is a heavy duty sanitary lubricant with extended performance, low friction properties. This lubricant is authorised by the NSF rated H1 for use in food processing plants for incidental food contact. All ingredients are FDA approved.

Cleaplex is designed for longer lubrication intervals, eliminating downtime to relubricate the equipment. This lubricant wears evenly on all moving parts, preventing metal to metal contact and equipment damage. It will not dry or gum on the equipment and is highly resistant to separation or bleed.
LUBRIPLATE Air Tool Lubricant is an air tool oil that provides excellent lubrication for both rotary and
reciprocating types of air tools, such as chipping hammers, impact wrenches, air motors, grinders, reamers,
drills, etc. It can be fed through an air line lubricator or by a squirt can directly into the tool through the
quick coupling air connection. LUBRIPLATE Air Tool Lubricant provides not only superior lubrication,
but dissolves and prevents the formation of gum and varnish deposits so often associated with air tool operations.
LUBRIPLATE Aero is a neutral lithium base lubricant, manufactured with a light viscosity mineral oil that remains plastic down to -53°C, has an ASTM Dropping Point of over 176°C and is an NLGI No. 1 consistency.
LUBRIPLATE Aero is recommended for a large variety of applications:
Trailer landing gear cases
Speedometers, odometers and tachometers
Parking meters -- Change boxes
Instruments -- Gaming machines
Garage and door opening mechanisms
Cables of various types
Steering columns and gear cases
TV antenna gear boxes
O-Ring and seal lubrication
Railway switch and signal equipment
LUBRIPLATE No. 105 grease is an excellent lubricant for coating engine parts when assembling either a new or rebuilt engine. It is an excellent rust preventive greases.
LUBRIPLATE No. 107 is an outstanding
concrete form release agent because it does not stain the concrete.
LUBRIPLATE No’s. 130-AA is designed for those applications where a grease-type lubricant
possessing extremely good water repellency and superior lubrication characteristics are desired. These
products are recommended for plain bearings, cams, guides, open gears, slides and chassis lubrication and
where temperatures do not exceed 80°C.
A series of Lithium-based greases for general purpose lubricants for food processing equipment as well as industrial applications. With one series of products, inventory and purchasing can be consolidated with LUBRIPLATE "630" greases.
This special grease lubricant has
been approved by Ford Motor Co. specification ESF-M1C-26-A for use as a starter motor shaft
lubricant. Also approved for starter
drives on Evinrude / Johnson
outboards.
The LUBRIPLATE "930" Series of lubricants are also listed as "multipurpose" but with a higher operating temperature range than the "630" Series. These lubricants possess high film strength and exceptional resistance to water, steam and other adverse operating conditions. Since these lubricants are of the non-melt type, they can be used successfully for high temperature applications up to 190°C and for short intervals up to 204°F.
LUBRIPLATE No. 1240, 1241 and 1242 are polymer type lubricants designed for heavy-duty and severe service applications that call for continuous protection under heavy load, moisture and other environmental extremes.
LUBRIPLATE No. 1444 has been specifically formulated for use on heavy-duty construction, quarry and
mining equipment.
LUBRIPLATE No. 1444 provides outstanding resistance to washout from water, caustic wash down
solutions and coolants and cutting fluids used in machining operations.
This tacky, polymer grease is excellent for slow to moderate speed bearings and chains which are subjected
to heat, steam and water.
LUBRIPLATE High Temp is a new development for extreme high temperature applications.
This lubricant is of the non-melt type and manufactured with high viscosity oils of exceptional
stability.
LUBRIPLATE Clearplex-2® and LUBRIPLATE Clearplex-1 are Zinc-Free, Aluminum Complex thickened, USP White Oil-based, food grade greases. They are manufactured with ingredients that comply with FDA 21 CFR 178.3570 for lubricants with incidental food contact. LUBRIPLATE Clearplex-2® and LUBRIPLATE Clearplex-1 greases are engineered for use in plain and anti-friction bearings in the food-processing industry. They provide outstanding performance in beverage processing machinery such as seamers and closers. Fiske Brothers Refining Company has produced these clear Aluminum Complex-based greases without sacrificing the additive performance package required for good anti-wear, anti-oxidation and water-resistant properties.
LUBRIPLATE Chain & Cable Fluid is a lubricating, penetrating and cleansing fluid designed for a multitude of applications. This product will not produce a dry surface; it will maintain a moist film. This unique film, however, will not pick up dust and dirt, but rather acts as a cleansing agent. In the lubrication of wire rope, it is essential not only to protect the outside of the wire, but also to penetrate into the strands to lubricate and reduce friction between these strands and to lubricate and protect the inner core from rust and corrosion. The same basic principles also apply to the lubrication of roller chains -- the required penetration, cleansing and lubrication of the inside of the links is vital in addition to the outside protection and lubrication. LUBRIPLATE Chain & Cable Fluid performs all of these functions most successfully.
LUBRIPLATE DS-ES Lubricant is developed specifically for the electrical and electronics industry. LUBRIPLATE DS-ES Lubricant is being used extensively in automotive switches and contact units where performance is exceeding all of the new safety standards set for this equipment.
LUBRIPLATE EMB (Electric Motor Bearing) Grease is a specially designed polymer type lubricant for all grease type electric motors, pumps, fan motors, as well as other ball and roller bearing applications.
LUBRIPLATE EMB Grease is recommended for high-speed, grease type bearings as well as
normal speeds.
The LUBRIPLATE FMO-AW Series of Lubricants was developed in order to meet the ever-increasing demands of pressure, speed and temperature that are placed on modern food machinery.
FGL-l for many plants, this NLGI 1 grade grease may be the most widely used lubricant due to its multi-functional capabilities. This includes low and high speeds, >>
LUBRIPLATE FGL Greases have been formulated to meet the increased demands of the food, beverage and pharmaceutical industries. The trend towards NSF H-1 Registered* products to replace H-2 products has meant a great deal of research and testing to improve the capabilities of lubricants with incidental food contact. LUBRIPLATE FGL greases are the result of these new demands.
These clear, tacky, adhesive, NSF H-1 Registered oils resist heavy water washdown and steam. For helical gearboxes, chains, linkages, cams, and >>
LUBRIPLATE Gear Shield Extra Heavy does not intend by its name to imply that it is an extra heavy product, but is an NLGI No. 3 grade lubricant designed especially for extra heavy duty applications. LUBRIPLATE Gear Shield Extra Heavy has proven itself an outstanding lubricant on a wide variety of applications. A leading heavy construction firm found it so successful in lubricating the dipper sticks, racks and pinions on their shovels handling blast furnace slag, that they adopted its use on all their shovel operations including strip mining, stone quarrying and highway construction. A leading manufacturer of heavy duty fork-lift trucks found that this lubricant was the only one that successfully lubricated the slides on some large vehicles designed for the Armed Services. Likewise, chemical and other processors using large open gear drives have found that LUBRIPLATE Gear Shield Extra Heavy has lubricated the gears more satisfactorily and prolonged the gear life considerably over that previously experienced using other gear compounds.
These 100% ester based synthetic fluids are specifically designed for use on oven chains in food manufacturing operations where incidental food contact is >>
LUBRIPLATE High Temp is a new development for extreme high temperature applications.
This lubricant is of the non-melt type and manufactured with high viscosity oils of exceptional
stability.
LUBRIPLATE Low Temp has many successful applications including a few listed below:
A general purpose lubricant for airplanes & ground support equipment.
Railroad switch lubricant.
General-purpose low temperature lubricant for chains, ball and roller bearings etc.
Ball and roller bearings operating at high rpm's.
Overrunning clutch lubricant.
Conveyors operating in cold rooms, freezers and outside.
Valve packing lubricant.
Electronic equipment and accessories.
"Genie" Automatic Garage Door Openers.
LUBRIPLATE Minus 70 Hydraulic Oil is a special anti-wear hydraulic oil designed for extreme low temperature operations where high fluid mobility is of utmost importance. LUBRIPLATE Minus 70 Hydraulic Oil is a heavy duty, high pressure, anti-wear fluid designed for high performance in extreme cold weather operations without sacrificing any of the lubricating qualities of LUBRIPLATE Minus 70 Hydraulic Oil. This oil has an extremely high viscosity index which guarantees excellent fluidity and very low torque under these adverse cold conditions.
LUBRIPLATE Metal Working Fluid is a specially developed product suitable for a variety of metal
working applications. The 12-ounce aerosol can, including extension spout, makes it the ideal lubricant
for:
Drilling
Sawing
Tapping
Grinding
Thread Chasing
Pipe Cutting
Filing
Nut Busting . . . . . And Much More !!!
DOES NOT CONTAIN FLUOROCARBONS - DOES NOT CONTAIN 1,1,1 TRICHLOROETHANE
LUBRIPLATE MAG-l is a polymer type lubricant for both plain and anti-friction bearings, gears, cams
and slides that will provide long service over a wide temperature range. LUBRIPLATE MAG-l is
especially designed to provide high film strength and also to provide for low torque or power reduction.
LUBRIPLATE MAG-l is designed to provide lubrication over a wide temperature range from -60°F (-
51°C) to +300°F (149°C).
LUBRIPLATE Hammer & Chisel Grease, has a high viscosity mineral oil base with an Aluminium complex thickener . Hammer & Chisel Grease is very tacky for good adhesive properties and is formulated with Extreme Pressure additives for extreme load applications. It's an exceptional lubricant for the sliding surfaces of cylinders and impact blocks of diesel hammers. With the Extreme Pressure properties and other performance benefits of Lubriplate Hammer & Chisel Grease, it can be used as a multipurpose Extreme Pressure grease on a wide range of equipment found on a construction site.
LUBRIPLATE Poly HP-2 is a polyurea-thickened lubricating grease formulated with the highest quality paraffinic base oils available. Fortified with corrosion and oxidation inhibitors, LUBRIPLATE Poly HP-2 is an excellent choice for the lubrication and protection of high-speed electric motor bearings as well as other industrial applications.
LUBRIPLATE Pure Tac is a food grade, NSF International H-1 Registered* grease designed for applications subjected to chemically treated water, heat and steam in food and beverage processing plants and canneries. Because of its extremely tacky and adhesive characteristics, it is also an excellent open gear grease. Pure Tac is recommended for all types of medium to slow speed bearings. Also, because of its outstanding resistance to water washout, Pure Tac is the ideal grease for hydrostatic cooker chains.
These extreme pressure lubricants are designed for use in helical, bevel helical, planetary and worm type gearboxes operating in the most demanding food manufacturing >>
The LUBRIPLATE SFL Series was developed to meet the ever-increasing demands placed on food-processing equipment today. The synthetic base fluid and the aluminum complex soap thickener allows for a wide operating temperature range for all four NLGI consistencies.
A high yield silicone aerosol that provides an odorless, colorless and stainless protective film. LUBRIPLATE General Purpose Food Grade Silicone Lubricant displays excellent benefits when used on rubber or metal molds as a release agent.
LUBRIPLATE SPO Lubricants are specially designed for a wide variety of industrial applications such as gear cases, machine ways, chains and general purpose lubrication. These oils will provide a long-lasting wear resistant film that reduces friction and heat. The polar affinity of SPO protects metal surfaces from rust and corrosion as
well as chemical corrosion. These oils have excellent demulsibility, oxidation resistance and thermal stability,thus extending lubricant life.
LUBRIPLATE Super FML Lubricants are among the most popular in the food industry as indicated by recent industry surveys. LUBRIPLATE FML Lubricants are white in color and due to their unexcelled lubrication characteristics, offer the utmost in lubrication and cleanliness. LUBRIPLATE FML greases provide exceptional anti-wear properties.
LUBRIPLATE SYNXTREME FG VG220 greases are 100% synthetic, calcium sulfonate based. This advanced technology delivers outstanding shear stability, reduced wear and excellent resistance to water and other corrosive substances. They are outstanding lubricants for all types of anti-friction bearings, which are subjected to wide operating temperature ranges. The synthetic fluid used in these greases delivers increased oxidation stability and enables them to be effective at application temperatures up to 400ºF with frequent re-lubrication intervals.
LUBRIPLATE SYNXTREME HD greases are 100% synthetic, calcium sulfonate based. This advanced technology delivers outstanding shear stability, reduced wear and excellent resistance to water and other corrosive substances. They are outstanding lubricants for all types of anti-friction bearings, which are subjected to wide operating temperature ranges. The synthetic fluid used in these greases delivers increased oxidation stability and enables them to be effective at application temperatures up to 400ºF with frequent re-lubrication intervals.
Formulated with 100% PAO synthetic base fluids for a variety of demanding applications. They are outstanding lubricants for use under severe conditions subject to >>
Formulated with 100% PAO synthetic base fluids for a variety of demanding applications. They are outstanding lubricants for use under severe conditions subject to >>
LUBRIPLATE V-61 Silicone Lubricant is designed for the plumbing industry.
The primary application is to lubricate the snap ring and O-rings in faucets.
It possesses excellent water washout properties that keeps the material in
place, and prevents the O-Rings from drying out, cracking and becoming
brittle. It is certified and listed NSF for Standard 61, the new requirement for
the plumbing industry.
Search
Bel-Ray Food Grade Lubricants & Industrial Lubricants
Lubriplate Food Grade Lubricants & Industrial Lubricants